Specifications & Features of DS3231 Real Time Clock (RTC) Module:- Two Time-of-Day Alarms. Digital Temp Sensor Output. Register for Aging Trim. DS 3231 RTC with 2032 Battery Holder. Highly Accurate RTC Completely Manages All Timekeeping Functions. Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year, with Leap-Year Compensation Valid Up to 2100.…
Specifications & Features of Dual Axis XY Joystick Module:- Dimensions: 40 x 27 x 15 (LxWxH) mm Weight: 10gm (without Hat). 2.54mm pin interface leads Operating Voltage: 5V. Long service life and stable performance Standard interface and electronic building blocks Widely use in Arduino DIY projects Cross rocker as a two-way 10K resistor, with the rocker in a different direction
Specification and features of ESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module:- WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units +19.5dBm output power in 802.11b mode Power down leakage current of <10uA Integrated low power 32-bit…
Specifications & Features of Flame Sensor infrared Receiver Ignition source detection module:- Indicator light: a green one for the switch, a red one for power. Built in a potentiometer for sensitivity control. Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO. Can detect…
Detection distance: 2 ~ 30cm Detection angle: 35 ° Comparator chip: LM393 3mm screw holes for easy mounting The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO. The comparator using LM393, stable. 3-5V DC power supply module can be used. When…
Specifications & Features of JLink V9 Debugger Emulator: - The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4 Can provide 3.3V and 0.8A current for the development board (pin 2) Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per…
Specification and Features of L293D Motor Driver Module:- L293D motor driver IC. Male burg stick connectors for supply, ground and input connection. Screw terminal connectors for easy motor connection. Wide supply voltage: 4.5 V to 12 V. Max supply current: 600 mA per motor. Screw terminal connectors for easy motor connection. High noise immunity inputs.
Specification and Features of L298N 2A Dual Motor Driver Module:- Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
Specifications & Features of MAX30100 Pulse Oximeter Heart Rate Sensor Module:- It is an integrated pulse oximetry and heart rate monitor sensor solution. Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design Measures absorbance of pulsing blood I2C interface plus INT pin Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package…
Specifications & Features of MAX7219 dot matrix module microcontroller module DIY KIT:- Requires only 3 communication wires of MCU Cascading multiple Matrix LED Module is very easy Size of the display is very compact The PCB features M3 holes for mounting.
Specifications & Features of MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module:- Dimensions: 128 x 32 x 1.5mm(LxWxH)(All 4 in 1) Dimension 32 x 32 x 1.5 mm (LxWxH) (Single Module) A single module can drive an 8×8 dot matrix common cathode Operating voltage: 5V Weight: 55 gm Fixing screws with 64 holes with a diameter…
Cable length: 1 Meter Colour: White Weight: 17g Life span: 5000 Best replacement for the original one or acts as a spare The cable is made of durable and high-quality material Enable you to easily transfer all your files from or to cellphone
Specifications and Features of MQ-3 Alcohol Detector Gas Sensor Module:- Signal output light indicator. Analog and level signal output. TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module). The carbon monoxide detection with better sensitivity. It has a long service life and reliable stability. Rapid response recovery features.
Specification and Features of MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module:- Good sensitivity to Combustible gas in a wide range High sensitivity to Propane, Butane, and LPG Long life and low cost Simple drive circuit An indication of the signal output Dual signal output (analog output, and TTL level output) The TTL output signal is low. (When low output…