Specifications & Features of JLink V9 Debugger Emulator: - The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4 Can provide 3.3V and 0.8A current for the development board (pin 2) Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per…
Jumper is a tiny metal connector that is used to close or open part of an electrical circuit. It may be used as an alternative to a dual in-line package (DIP) switch. A jumper has two or more connecting points, which regulate an electrical circuit board.
Specification and Features of L293D Motor Driver Module:- L293D motor driver IC. Male burg stick connectors for supply, ground and input connection. Screw terminal connectors for easy motor connection. Wide supply voltage: 4.5 V to 12 V. Max supply current: 600 mA per motor. Screw terminal connectors for easy motor connection. High noise immunity inputs.
Specification and Features of L298N 2A Dual Motor Driver Module:- Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
Specifications & Features of MAX30100 Pulse Oximeter Heart Rate Sensor Module:- It is an integrated pulse oximetry and heart rate monitor sensor solution. Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design Measures absorbance of pulsing blood I2C interface plus INT pin Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package…
Specifications & Features of MAX7219 dot matrix module microcontroller module DIY KIT:- Requires only 3 communication wires of MCU Cascading multiple Matrix LED Module is very easy Size of the display is very compact The PCB features M3 holes for mounting.
Specifications & Features of MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module:- Dimensions: 128 x 32 x 1.5mm(LxWxH)(All 4 in 1) Dimension 32 x 32 x 1.5 mm (LxWxH) (Single Module) A single module can drive an 8×8 dot matrix common cathode Operating voltage: 5V Weight: 55 gm Fixing screws with 64 holes with a diameter…
Cable length: 1 Meter Colour: White Weight: 17g Life span: 5000 Best replacement for the original one or acts as a spare The cable is made of durable and high-quality material Enable you to easily transfer all your files from or to cellphone
Features:- Compatible with MCS-51 Products 8K Bytes of In-System Reprogrammable Flash Memory Endurance: 1,000 Write/Erase Cycles Fully Static Operation: 0 Hz to 24 MHz Three-level Program Memory Lock 256 x 8-Bit Internal RAM 32 Programmable I/O Lines Three 16-bit Timer/Counters Eight Interrupt Sources Programmable Serial Channel Low Power Idle and Power Down Modes