Specifications and Features of MQ-3 Alcohol Detector Gas Sensor Module:- Signal output light indicator. Analog and level signal output. TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module). The carbon monoxide detection with better sensitivity. It has a long service life and reliable stability. Rapid response recovery features.
Specification and Features of MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module:- Good sensitivity to Combustible gas in a wide range High sensitivity to Propane, Butane, and LPG Long life and low cost Simple drive circuit An indication of the signal output Dual signal output (analog output, and TTL level output) The TTL output signal is low. (When low output…
Specifications & Features of NEO-6M GPS Module with EPROM:- 5Hz position update rate Operating temperature range: -40 TO 85°CUART TTL socket EEPROM to save configuration settings Rechargeable battery for Backup The cold start time of 38 s and Hot start time of 1 s Supply voltage: 3.3 V Configurable from 4800 Baud to 115200 Baud rates. (default 9600) SuperSense ®…
Specifications & Features of NRF24L01 + 2.4GHZ Wireless Transceiver Module:- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna…
Specifications and Features of NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module:- It uses 2.4GHz global open ISM band, with license-free. Transmit power is greater than +20 dBm. Support six-channel data reception. 2Mbit/s speed makes high-quality VoIP possible Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping. Low cost: integrated with high-speed signal processing parts associated…
Specifications of NTC Thermistor Temperature sensor module:- Good sensitivity. NTC thermistor sensor. The comparator output signal is more than 15mA. Possibel to adjust the temperature distribution position detection threshold Working voltage: 3.3V-5V Output form: DO digital switching outputs (0 and 1) and AO analog voltage output Fixed bolt hole for easy installation Small PCB board size: 3.2cm x 1.4cm uses…
Specification and Features PIR Motion Sensor Detector Module HC-SR501 :- Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default) Work temperature: -20-+80°C
Specifications & Features of Pulse Sensor - Heart Rate Detector:- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see…
Specification and Features of Raspberry Pi Pico:- RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard…