Specification of STM32 ECU: -

• Power Electronics.
• Environmental Monitoring.
• Home Automation.
• Embedded Systems Development.
• IoT (Internet of Things) Prototyping.

Specifications and Features: -

1. Acrylic Sheet
2. Due to the Acrylic Sheet it slows the flow of current.
3. Matching jumper, the diameter of 0.8mm
4. Use: experiment, testing
5. Features: recycling, recycling, Color clear structure, easy to use
6. Accepts a variety of wire sizes (29-20 AWG).
7. 2 Terminal Strip, Tie-point 1260: 4 Distribution strips, Tie-point 400.
8. Completely reusable, Coloured coordinates for easy component placement.
9. Perfect for the proto-typing circuit, electronic and electrical experiments without soldering; Works great with S32K144, Arduino, ESP32 etc..

Specifications:-

• 1.27MM use for USB ASP ISP JTAG AVR wire IDC Flat Ribbon DATA Cable
• 1.27MM pitch with 30CM Length Female to Female  FRC Cable
• Withstand Voltage: 300V; temperature: 105℃
• Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR JTAG Debuggers, In-System Programmers, ISP download, etc.
• Package Content: 1 x 30cm Flat Ribbon Cable 1.27mm Pitch 2 Row 5 Pin Female to Female Wires IDC Ribbon Connector
• Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins.

Specifications:-

• 2.54MM use for USB ASP ISP JTAG AVR wire IDC Flat Ribbon DATA Cable
• 2.54MM pitch with 30CM Length Female to Female  FRC Cable
• Withstand Voltage: 300V; temperature: 105℃
• Applying to digital cameras, digital camcorders, laptops, LCD TVs, LCD monitors, suitable for most Atmel AVR JTAG Debuggers, In-System Programmers, ISP download, etc.
• Package Content: 1 x 30cm Flat Ribbon Cable 2.54mm Pitch 2 Row 10 Pin Female to Female Wires IDC Ribbon Connector
• Ribbon cable saves space and time on circuit interconnecting assemblies. The Conductor ribbon cable separate easily for clean terminations with standard wire connectors, jacks and pins.

--------------------------------------------------------------- Technical Specifications and Features of Innomaker: - ---------------------------------------------------------------

• Compatibility: Raspberry Pi Zero(W)/Pi3B+/PI4/Beagle bone/Tinker Board and any single-board computer.
• Power: USB-powered, no external power required.
• CAN Baud Rate: Supports a broader range of CAN baud rates, from 20Kbps to 1Mbps and both CAN bus 2.0A and 2.0B specifications, ensuring compatibility with a wide range of CAN-enabled devices.
• Microcontroller: Onboard STM32F0 microcontroller with DMA technique.
• Protection: Power supply isolation, signal input/output isolation, surge/static protection, selectable 120-ohm resistor.
• Software Support: C/Python demos of Socket-CAN, InnoMaker Windows/MacOs/Linux Soft_API.
• Certifications: CE and FCC certified.

Specifications & Features of JLink V9 Debugger Emulator: -

• The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4
• Can provide 3.3V and 0.8A current for the development board (pin 2)
• Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per second.
• Support debugging of all ARM chips, support MDK or IAR, and compile environment IDE supported by other standard JLink.
• Original firmware, full automatic upgrade The main control chip adopts STM32F205, without losing the firmware, and the hardware is upgraded to the latest version of V9.4

Key Features:-

• This adapter board converts the traditional 2x10 (0.1"/2.54mm pitch) JTAG cable to a narrower 2x5 (0.05"/1.27mm pitch) SWD cable, making it more convenient for connecting devices such as JTAGulator or SEGGER J-Link to mini boards with a 10-pin SWD programming connector.
• This is a 10-pin and 20-pin connector flat ribbon cable, easy to insert directly into the PCB, ribbon cable saves the space and time of the circuit interconnection components.
• The breakout board features double-sided immersion gold plating, which prevents oxidation and ensures high-quality performance
• Boundary scanning enables access to the internal signal logic state of the chip and the status of chip pins, among other things.
• It's compatible with ARM-USB-OCD, ARM-USB-OCD-H, ARM-USB-TINY, ARM-USB-TINY, as well as Segger's JLINK and other JTAG/SWD programmers/debuggers, system programmers, Isp downloader.

Key Features

• NXP S32K344EHT1VPBST chipset
• Wide input voltage range: 6V to 17V
• Input power monitoring via INA219
• USB Type-C for power supply
• Switchable voltage for VDD_HV_A bus (3.3V or 5V)
• Onboard Segger J-Link debugger
• Onboard USB to UART converter (CP2102)
• Three CAN FD transceivers
• One 100Base-T1 Ethernet transceiver
• Two LIN transceivers
• 64Mb QSPI flash memory
• Two user-programmable switches
• Two RGB LEDs
• 16 MHz high-speed external oscillator (HSE) and 32.768 kHz low-speed external oscillator (LSE)
• High-precision (3.3V ± 0.2%) voltage reference for ADC

Features:

• 2 Debug Connectors for connecting to Target S32Kxxx Microcontroller

• Target MCU Power Configuration

• Connection to Host Laptop/Desktop

• Segger Jlink Debug Port

• Virtual UART Serial Com Port

• On-Board Reset Button

Overview The Elecronics V3 Board is a low-cost evaluation and […]

Specification & Features of USB Logic Analyze: -

1. Logical light indication: a small light indicates CHO electrical level.
2. Input feature: 5PF,100K Ohm.
3. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits.
4. 8-Channels USB logic analyzer with a 24Mhz sampling frequency
5. Can analyze UART, IIC, and SPI, etc. automatically.
6. Great for MCU, ARM system and FPGA development
7. Voltage: 0-5.5V

Specifications:-

• Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
• Interface: SPI
• LCD type: IPS
• Controller: ST7735S
• Resolution: 128(H)RGB x 160(V)
• Display area: 35.04（W）x 28.03（H）mm
• Pixel size: 0.219（H）x 0.219（W）mm
• Dimension: 56.5(H) x 34(V) mm

Specifications:-

• Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
• Interface: SPI
• LCD type: IPS
• Controller: ST7789
• Resolution: 135(H)RGB x 240(V)
• Display area: 14.864（H）x 24.912（V）mm
• Pixel size: 0.1101（H）x 0.1035（V）mm
• Dimension: 35(H) x 32(V) mm

Specifications:-

• Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
• Interface: SPI
• LCD type: IPS
• Controller: ST7789
• Resolution: 240(H)RGB x 240(V)

Specifications:-

• Operating voltage: 3.3V/5V (Please ensure that the power supply voltage and logic voltage are consistent, otherwise it will not work properly)
• Interface: SPI
• LCD type: IPS
• Controller: ST7789
• Resolution: 135(H)RGB x 240(V)
• Display area: 27.72（H）x 27.72（V）mm
• Pixel size: 0.1155（H）x 0.1155（V）mm
• Dimension: 50 x 35(mm)