Programmable ECU for Automotive: SmartWheelsV1

Specifications & Features of JLink V9 Debugger Emulator: –

• Type C cable Powered and connection to Host Desktop/Laptop
• Works on SWD protocol for programming and debugging the NXP S32K1xx and NXP S32K3xx Series of MCU’s.
• Configured as Jlink Debugger for Programming/Debugging via S32 Design Studio/FreeMaster/ MBDT/Jlink Software Toolchain
• 2 Debug Connectors to connect to Host NXP Semiconductors S32K Microcontroller’s: 20 Pin JTAG and 10 Pin SWD connector
• Power configurable to Host NXP S32K MCU between 3.3 V and 5V.
• Can provide 3.3V or 5V and uptp 1A current for the development board by powering the S32K MCU via ProBug Debugger.
• Onboard Reset Button to reset the Host NXP S32K MCU via Debugger and also Power/Communication LEDs.
• Virtual UART COM Port Detection via same Debug connector for logging Realtime data via UART Peripheral.