Specification and Features :- 1 channel 5v relay module Operating Voltage: 5V Max Current : 20mA Relay Contact Current Capacity at AC250V: 10A Relay Contact Current Capacity at DC5V: 10A One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for avoidance of malfunction Power supply indicator lamp
Specifications & Features of 3 Colour RGB SMD LED Board Module Full Three Color LED:- RGB trichromatic limiting resistor to prevent burnout PWM adjusted color mixing Working voltage: 5V LED drive mode: Common cathode driver
Specification and Features of 300 RPM Dual Shaft BO Motor:- Low density: lightweight, low inertia. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Operating Voltage(VDC): 3~12 ?Shaft Length (mm): 8.5 ?Shaft Diameter (mm): 5.5 (Double D-type) No Load…
Specification and Features of 4 Channel 5V Relay Module with Optocoupler:- One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for the avoidance of malfunction Power supply indicator and Control indicator lamp Power supply and relay instructions, lit, the disconnect is off; The input signal, signal, common Terminal and start…
Specifications & Features of 433MHz RF Transmitter Receiver Wireless Module:- Low Power Consumption Easy For RF based Application Complete Radio Transmitter Transmit Range Up To 50m CMOS / TTL Input No Adjustable Components Very Stable Operating Frequency Low Current Consumption (Typ 11mA) Wide Operating Voltage ASK Modulation
Specification and Features of 5V Dual Channel Relay Module with Optocoupler;- Low Level Trigger Relay Module Two separate LEDs for On/Off indication of the Relay. Triggering input voltage 3.3V – 5V Two separate LEDs for On/Off indication of the Relay Triggering input voltage 3.3V – 5V 4) Back EMF protection Back EMF protection 2 LEDs to indicate when relays are…
Specifications and Features of 8051 & AVR USB-ASP Programmer:- Allows You to Read or Write the Microcontroller Flash, EEPROM, Fuse Bit, and Lock Bits. Support Windows OS (XP to 10), Mac OS X, and Linux. ATmega8 with USBasp Firmware Pre-loaded. Support ATmega 8/328, 16, 32, and many others including 8051 with the same Programmer. SCK Option to Support Targets With Low Clock Speed (<1.5 MHz).…
Specifications & Features of Active Buzzer Module - 3.3-5V;- Product Name:3.3 to 5V Active Buzzer Alarm Module Sensor Transistor drive module uses 8550 With fixed bolt hole- easy installation- 2.6mm aperture. Operating voltage 3.3V-5V PCB Dimensions: 34.28 mm (L) * 13.29 mm (W) * 11.5 mm (H
PACKAGE INCLUDES; QYT. ITEMS UNIT 1 X Arduino UNO R3 CH3400 1 X Relay Module 5V 1 X 16x2 LCD Display 1 X Servo Motor (SG90) 1 X Breadboard 1 X Piezo Buzzer 2 X 7 Segment Display (0.56 Inch) 5 X Buttons (6mm) LED (5 MM) 5 X RED 5 X GREEN 5 X YELLOW 5 X BLUE…
Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Microcontroller ATmega328 Architecture AVR Operating Voltage 5…
Dimensions (maximum): 75.14 x 53.51 x 15.08mm Weight: 27.95g/0.98oz Microcontroller: Atmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used…
Specfications of:- Bluetooth protocol: Bluetooth Specification v2.0+EDR Frequency: 2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power: ≤4dBm, Class 2 Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support Incredible small size…
Specifications & Features of BMP180 Digital Barometric Sensor Module compatible:- 1.8V to 3.6V Supply Voltage Low power consumption – 0.5uA at 1Hz I2C interface Max I2C Speed: 3.5Mhz Very low noise – up to 0.02hPa (17cm) Fully calibrated Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 30A Sensitivity: 100mV/A
