The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Microcontroller ATmega328 Architecture AVR Operating Voltage 5…
Board Specification: - S32K144 MCU in LFQP100 pin package. onboard RGB LED and 2 switches 1 Variable Potentiometer On-board UART for debugging via Type C USB cable On-Board CAN transceiver IC TJA1051 via green screw Terminals. TX-RX LED indicator pins for onboard UART and CAN communication. Onboard JTAG-SWD 10-pin Connector for JLink SWD Debugging
Dimensions (maximum): 75.14 x 53.51 x 15.08mm Weight: 27.95g/0.98oz Microcontroller: Atmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used…
Specfications of:- Bluetooth protocol: Bluetooth Specification v2.0+EDR Frequency: 2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power: ≤4dBm, Class 2 Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support Incredible small size…
Specifications & Features of BMP180 Digital Barometric Sensor Module compatible:- 1.8V to 3.6V Supply Voltage Low power consumption – 0.5uA at 1Hz I2C interface Max I2C Speed: 3.5Mhz Very low noise – up to 0.02hPa (17cm) Fully calibrated Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 30A Sensitivity: 100mV/A
Surfaces of beam ground (Parallelism less than 0.015, 20% better tha··n normal) to ensure smooth movement throughout; Special glass grating adapted; With fractional function; Larger size digital screen for easy reading ( Digit Size: 11.5mm );
Features of DC Motor – 10RPM – 12Volts:- The shaft has a hole for better coupling. Operating Voltage(V): 12 Rated Torque(kg-cm): 7 Stall Torque(kg-cm): 28
Features: Temperature: -30C ~ +70C. Rated load: up to DC 30V / 1.0A. Withstand voltage: AC 500V (50Hz)/min. Actuating force: 3N 20N. Package Includes: 1 x DC-005 5.52.1mm Female DC Power Jack Supply Socket. Specifications :- Plug Type 5.5 x 2.1 mm No. of Pin 3 Operating Temperature () -30 ~ +70 Rated load DC 30V / 1.0A Contact resistance…
AC Voltage 750 DC Voltage (Volt) 1000 DC Current (Ampere) 10 Model No. DT-830D Accuracy (%age) 1% + 2 Digit Display 4 Digit Battery 9V Size 126 x 70 x 24mm Low Battery Indication Yes Display 3-1/2 digit LCD, max reading of 1999 Power 9V battery Weight 150g