Specifications & Features of Sound Detection Sensor Module:- Operating voltage 3.3V-5V Outputs digital switching output (high and low levels 0 and 1 Operating current (Vcc=5V): 4-8mA Microphone sensitivity (1Khz): 52-48dB Microphone Impedance: 2.2KΩ Microphone Frequency: 16-20Khz Microphone S/N ratio: 54dB Signal output indication Single channel signal output Outputs low level and the signal light when there is sound
Supports momentary or latching/toggle modes. Supports Active High or Active Low output signal modes. Dimensions : 15mm x 11mm. Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V. Sensitivity can adjust by the capacitance(0~50pF). Have two kinds of sampling length by pad option(SLRFTB pin). Stable…
Specifications and Features:- TTP223 1-Channel Capacitive Touch Sensor Module Red Color:- Supports momentary or latching/toggle modes. Supports Active High or Active Low output signal modes. Dimensions : 15mm x 11mm. Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V. Sensitivity can adjust by the capacitance(0~50pF).…
Features :- Made by the high-quality stainless steel Antistatic, Anti-magnetic and anti-acid Cutting-edge parts of pure manual polishing, fine workmanship Processed in high temperature and planting antistatic material Tips after a long time of use are still super straight. Bend Tweezers Head Provides an easy and convenient operation Suitable for planting small or thin water plant Small tweezer with elbow,…
Features Type-A USB 2.0 Plug (Female) Universal and secure USB protocol Its plug and play (Hot pluggable) Can be used to interface mouse and keyboards to uP/uC USB power supply: 100 to 500 mA Protocol supports robust error detection
Specification & Features of USB Logic Analyze: - Logical light indication: a small light indicates CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits. 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc. automatically. Great for MCU, ARM system and FPGA development…
Specifications & Features of Vibration Sensor Module SW-420:- Using SW-420 normally closed type vibration sensor Comparator output, clean signal, good waveform, strong driving ability, >15mA Operating voltage 3.3V ~ 5V Output format: digital switching output (0 and 1) Using a wide voltage LM393 comparator With bolt holes for easy installation
Voltage input range: DC 0-25V Voltage detection range: DC 0.02445V-25V Voltage Analog Resolution: 0.00489V DC input connector: Terminal cathode connected to VCC, GND negative pole Output interface: "+" connect 5/3.3V, "-" connect GND, "s" connect the Arduino AD pins
Specifications & Features of Water Level Depth Detection Sensor:- Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
Made of high grade alloy steel and electronically heat treated. 115mm Nipper with the capacity to cut Aluminum Wires up to 1.2mm Soft cushioned grip for comfortable work. General Use Wire Cutter