ALL ABOUT ELECTRONICS
-
- Sale!
- COMPONENTS
0.96 Inch I2C/IIC 4pin OLED Display Module
- ₹ 225
- Display Size 2.44 cm (0.96 inch) Pixel Colour Blue Resolution 128 x 64 Pixels Driving Voltage 3.3-5V Operating Temperature -40~70 Celsius Interface Type I2C IIC Length (cm) 2.75 cm Width (cm) 2.75 cm Height (cm) 1.1 cm Weight (gm) 7 gm
- Add to cart
-
- Sale!
- MODULE & SENSOR
1 Channel 5V Relay Module
- ₹ 55
- Specification and Features :- 1 channel 5v relay module Operating Voltage: 5V Max Current : 20mA Relay Contact Current Capacity at AC250V: 10A Relay Contact Current Capacity at DC5V: 10A One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for avoidance of malfunction Power supply indicator lamp
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS, MODULE & SENSOR
12V 1A DC Power Supply Adaptor
- ₹ 129
- Specifications:- Input - 100-240 VAC 50/60Hz Category - Switch Mode Power Adaptor (SMPS) Output Type - DC Output - 12Volts 1Amp
- Add to cart
-
- Sale!
- CAPACITOR
1660 Points Solderless Breadboard
- ₹ 500
- Specifications and Features: - Blister Card Phosphor bronze plating spring clip Matching jumper, the diameter of 0.8mm Use: experiment, test Features: recycling, recycling, Color clear structure, easy to use
- Add to cart
-
- Sale!
- COMPONENTS
2 Pin 2.54mm Pitch Pluggable Screw Terminal Block
- ₹ 10
- Saves space due to the small design Screw connection with tension sleeve Maximum contact force ensures a low-temperature rise Connection in accordance with EN-VDE Standard.
- Add to cart
-
- COMPONENTS
2 Pin 5.08mm Pitch Pluggable Screw Terminal Block
- ₹ 15
- Saves space due to the small design Screw connection with tension sleeve Maximum contact force ensures a low-temperature rise Connection in accordance with EN-VDE Standard
- Add to cart
-
- Sale!
- MODULE & SENSOR
3 Colour RGB SMD LED Board Module Full Three Color LED
- ₹ 45
- Specifications & Features of 3 Colour RGB SMD LED Board Module Full Three Color LED:- RGB trichromatic limiting resistor to prevent burnout PWM adjusted color mixing Working voltage: 5V LED drive mode: Common cathode driver
- Add to cart
-
- Sale!
- MODULE & SENSOR, Motor
300 RPM Dual Shaft BO Motor
- ₹ 50
- Specification and Features of 300 RPM Dual Shaft BO Motor:- Low density: lightweight, low inertia. Capability to absorb shock and vibration as a result of elastic compliance. Ability to operate with minimum or no lubrication, due to inherent lubricity. The relatively low coefficient of friction. Operating Voltage(VDC): 3~12 ?Shaft Length (mm): 8.5 ?Shaft Diameter (mm): 5.5 (Double D-type) No Load…
- Add to cart
-
- Sale!
- MODULE & SENSOR
4 Channel 5V Relay Module with Optocoupler
- ₹ 159
- Specification and Features of 4 Channel 5V Relay Module with Optocoupler:- One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for the avoidance of malfunction Power supply indicator and Control indicator lamp Power supply and relay instructions, lit, the disconnect is off; The input signal, signal, common Terminal and start…
- Add to cart
-
- Sale!
- MODULE & SENSOR
433MHz RF Transmitter Receiver Wireless Module
- ₹ 150
- Specifications & Features of 433MHz RF Transmitter Receiver Wireless Module:- Low Power Consumption Easy For RF based Application Complete Radio Transmitter Transmit Range Up To 50m CMOS / TTL Input No Adjustable Components Very Stable Operating Frequency Low Current Consumption (Typ 11mA) Wide Operating Voltage ASK Modulation
- Add to cart
-
- Sale!
- MODULE & SENSOR
5V Dual Channel Relay Module with Optocoupler
- ₹ 85
- Specification and Features of 5V Dual Channel Relay Module with Optocoupler;- Low Level Trigger Relay Module Two separate LEDs for On/Off indication of the Relay. Triggering input voltage 3.3V – 5V Two separate LEDs for On/Off indication of the Relay Triggering input voltage 3.3V – 5V 4) Back EMF protection Back EMF protection 2 LEDs to indicate when relays are…
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS
8 in 1 Soldering kit for beginners
- ₹ 670
- 25WT SOLDERING IRON IRON SOLDERING STAND SOLDER WIRE WIRE CUTTER FLUX COPPER WICK TWEEZER MULTIMETER
- Add to cart
-
- Sale!
- MODULE & SENSOR
8051 & AVR USB-ASP Programmer
- ₹ 399
- Specifications and Features of 8051 & AVR USB-ASP Programmer:- Allows You to Read or Write the Microcontroller Flash, EEPROM, Fuse Bit, and Lock Bits. Support Windows OS (XP to 10), Mac OS X, and Linux. ATmega8 with USBasp Firmware Pre-loaded. Support ATmega 8/328, 16, 32, and many others including 8051 with the same Programmer. SCK Option to Support Targets With Low Clock Speed (<1.5 MHz).…
- Add to cart
-
- COMPONENTS
9v Snapper
- ₹ 4
- Hard Plastic T-type connector Material: ABS Length: 15cm Stripped and Tinned leads, 1 red and 1 black Plug Type: 2.1 x 5.5mm Male to 9V Battery Clip Material Buckle Line Interface Material: tinned copper buckle 7*0.12. Length of lines: 13.5cm Size of DC Connector: 2.1mm*5.5mm
- Add to cart
-
- Sale!
- MODULE & SENSOR
Active Buzzer Module – 3.3-5V
- ₹ 45
- Specifications & Features of Active Buzzer Module - 3.3-5V;- Product Name:3.3 to 5V Active Buzzer Alarm Module Sensor Transistor drive module uses 8550 With fixed bolt hole- easy installation- 2.6mm aperture. Operating voltage 3.3V-5V PCB Dimensions: 34.28 mm (L) * 13.29 mm (W) * 11.5 mm (H
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS, MODULE & SENSOR
Arduino Kit For Beginners
- ₹ 1,199
- PACKAGE INCLUDES; QYT. ITEMS UNIT 1 X Arduino UNO R3 CH3400 1 X Relay Module 5V 1 X 16x2 LCD Display 1 X Servo Motor (SG90) 1 X Breadboard 1 X Piezo Buzzer 2 X 7 Segment Display (0.56 Inch) 5 X Buttons (6mm) LED (5 MM) 5 X RED 5 X GREEN 5 X YELLOW 5 X BLUE…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Arduino Mega
- ₹ 1,349
- Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Arduino Nano
- ₹ 529
- The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino Duemilanove, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Microcontroller ATmega328 Architecture AVR Operating Voltage 5…
- Add to cart
-
- Sale!
- CAPACITOR
Arduino of Automotive World: ElecronicsV2
- ₹ 5,000
- Board Specification: - S32K144 MCU in LFQP100 pin package. onboard RGB LED and 2 switches 1 Variable Potentiometer On-board UART for debugging via Type C USB cable On-Board CAN transceiver IC TJA1051 via green screw Terminals. TX-RX LED indicator pins for onboard UART and CAN communication. Onboard JTAG-SWD 10-pin Connector for JLink SWD Debugging
- Add to cart
-
- Sale!
- MODULE & SENSOR
Arduino Uno
- ₹ 699
- Dimensions (maximum): 75.14 x 53.51 x 15.08mm Weight: 27.95g/0.98oz Microcontroller: Atmega328 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 32 KB (ATmega328) of which 0.5 KB used…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Bluetooth Module (Hc05)
- ₹ 250
- Specfications of:- Bluetooth protocol: Bluetooth Specification v2.0+EDR Frequency: 2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power: ≤4dBm, Class 2 Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both 2Mbps and 3Mbps modulation modes Full Speed Bluetooth Operation with Full Piconet Support and Scatternet Support Incredible small size…
- Add to cart
-
- Sale!
- MODULE & SENSOR
BMP180 Digital Barometric Sensor Module compatible
- ₹ 69
- Specifications & Features of BMP180 Digital Barometric Sensor Module compatible:- 1.8V to 3.6V Supply Voltage Low power consumption – 0.5uA at 1Hz I2C interface Max I2C Speed: 3.5Mhz Very low noise – up to 0.02hPa (17cm) Fully calibrated Pressure Range: 300hPa to 1100hPa (+9000m to -500m)
- Add to cart
-
- Sale!
- MODULE & SENSOR
CURRENT SENSOR ACS
- ₹ 170
- Low-noise analog signal path Device bandwidth is set via the new FILTER pin 5 µs output rise time in response to step input current Small footprint, low-profile SOIC8 package 2.1 kVRMS minimum isolation voltage from pins 1-4 to pins 5-8 Supply Voltage: 4.5V~5.5V DC Measure Current Range: 30A Sensitivity: 100mV/A
- Add to cart
-
- INSTRUMENTS & TOOLS
DASQUA High Precision 6 Inch/150mm Electronic Micrometer Digital Caliper With Large LCD Screen & Easy Inch And Millimeter Conversion
- Surfaces of beam ground (Parallelism less than 0.015, 20% better tha··n normal) to ensure smooth movement throughout; Special glass grating adapted; With fractional function; Larger size digital screen for easy reading ( Digit Size: 11.5mm );
- Read more
-
- Sale!
- Motor
DC Motor – 10RPM – 12Volts
- ₹ 149
- Features of DC Motor – 10RPM – 12Volts:- The shaft has a hole for better coupling. Operating Voltage(V): 12 Rated Torque(kg-cm): 7 Stall Torque(kg-cm): 28
- Add to cart
-
- Sale!
- COMPONENTS
DC SOCKET (BARREL JACK)
- ₹ 5
- Features: Temperature: -30C ~ +70C. Rated load: up to DC 30V / 1.0A. Withstand voltage: AC 500V (50Hz)/min. Actuating force: 3N 20N. Package Includes: 1 x DC-005 5.52.1mm Female DC Power Jack Supply Socket. Specifications :- Plug Type 5.5 x 2.1 mm No. of Pin 3 Operating Temperature () -30 ~ +70 Rated load DC 30V / 1.0A Contact resistance…
- Add to cart
-
- Sale!
- INSTRUMENTS & TOOLS
Digital Multimeter
- ₹ 150
- AC Voltage 750 DC Voltage (Volt) 1000 DC Current (Ampere) 10 Model No. DT-830D Accuracy (%age) 1% + 2 Digit Display 4 Digit Battery 9V Size 126 x 70 x 24mm Low Battery Indication Yes Display 3-1/2 digit LCD, max reading of 1999 Power 9V battery Weight 150g
- Add to cart
-
- Sale!
- MODULE & SENSOR
DS3231 Real Time Clock (RTC) Module
- ₹ 235
- Specifications & Features of DS3231 Real Time Clock (RTC) Module:- Two Time-of-Day Alarms. Digital Temp Sensor Output. Register for Aging Trim. DS 3231 RTC with 2032 Battery Holder. Highly Accurate RTC Completely Manages All Timekeeping Functions. Real-Time Clock Counts Seconds, Minutes, Hours, Date of the Month, Month, Day of the Week, and Year, with Leap-Year Compensation Valid Up to 2100.…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Dual Axis XY Joystick Module
- ₹ 45
- Specifications & Features of Dual Axis XY Joystick Module:- Dimensions: 40 x 27 x 15 (LxWxH) mm Weight: 10gm (without Hat). 2.54mm pin interface leads Operating Voltage: 5V. Long service life and stable performance Standard interface and electronic building blocks Widely use in Arduino DIY projects Cross rocker as a two-way 10K resistor, with the rocker in a different direction
- Add to cart
-
- Sale!
- MODULE & SENSOR
ESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module
- ₹ 135
- Specification and features of ESP-12E ESP8266 Serial Port WIFI Wireless Transceiver Module:- WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units +19.5dBm output power in 802.11b mode Power down leakage current of <10uA Integrated low power 32-bit…
- Add to cart
-
- Sale!
- INSTRUMENTS & TOOLS
Ferric Chloride (Fecl3) PCB Etching Agent
- ₹ 149
- High Quality Ideal For PCB DIY PCB Making PCB Etching Agent You must use gloves while etching with FeCl3 as it may cause irritation to your skin.
- Add to cart
-
- Sale!
- MODULE & SENSOR
Flame Sensor infrared Receiver Ignition source detection module
- ₹ 45
- Specifications & Features of Flame Sensor infrared Receiver Ignition source detection module:- Indicator light: a green one for the switch, a red one for power. Built in a potentiometer for sensitivity control. Onboard signal output indication, output effective signal is high, at the same time the indicator light up, the output signal can directly connect to microcontroller IO. Can detect…
- Add to cart
-
- Sale!
- COMPONENTS
Fuse
- ₹ 5
- Select options
-
- Sale!
- Motor
Gear motor
- ₹ 50
- Features :- Operating Voltage: 3 to 12V. Current (without loading): 40-180mA. RPM: 200 rpm. Output Torque: 0.35 kg cm.
- Add to cart
-
- Sale!
- CCB, INSTRUMENTS & TOOLS
HAND DRILL TO BENCH PRES DRILL STAND
- ₹ 1,399
- Name :HAND DRILL TO BENCH PRES DRILL STAND Material : Others Type : Na Product Breadth : 15 Cm Product Height : 7 Cm Product Length : 35 Cm Pack of : Pack Of 1
- Add to cart
-
- Sale!
- MODULE & SENSOR
HUMIDITY SENSOR DHT-11
- ₹ 120
- Model AM2302 Accuracy resolution 0.1 Humidity range 0-100%RH Temperature range -40~80°C Humidity measurement precision ±2%RH
- Add to cart
-
- Sale!
- MODULE & SENSOR
IR SENSOR MODULE
- ₹ 40
- Detection distance: 2 ~ 30cm Detection angle: 35 ° Comparator chip: LM393 3mm screw holes for easy mounting The sensor module output port OUT can be directly connected with the microcontroller IO port can also be driven directly to a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO. The comparator using LM393, stable. 3-5V DC power supply module can be used. When…
- Add to cart
-
- Sale!
- MODULE & SENSOR
JLink V9 Debugger Emulator – ARM MCU Development Tool
- ₹ 2,399
- Specifications & Features of JLink V9 Debugger Emulator: - The main control chip adopts STM32F205, not lose firmware, and the hardware is upgraded to the latest version of V9.4 Can provide 3.3V and 0.8A current for the development board (pin 2) Support standard JTAG interface and 2-wire SWD debugging interface. The speed can reach 20M (JTAG) / 15M (SWD) per…
- Add to cart
-
- Sale!
- CAPACITOR
JTAG (2×10 2.54mm) to SWD (2×5 1.27mm) Cable Adapter Board
- ₹ 500
- Technical Details: - Dimensions w/components: 34mm x 24mm x 12mm / 1.3" x 0.9" x 0.5" Weight: 5.7g
- Add to cart
-
- Sale!
- COMPONENTS
JUMPER
- ₹ 5
- Jumper is a tiny metal connector that is used to close or open part of an electrical circuit. It may be used as an alternative to a dual in-line package (DIP) switch. A jumper has two or more connecting points, which regulate an electrical circuit board.
- Add to cart
-
- Sale!
- MODULE & SENSOR
L293D Motor Driver Module
- ₹ 80
- Specification and Features of L293D Motor Driver Module:- L293D motor driver IC. Male burg stick connectors for supply, ground and input connection. Screw terminal connectors for easy motor connection. Wide supply voltage: 4.5 V to 12 V. Max supply current: 600 mA per motor. Screw terminal connectors for easy motor connection. High noise immunity inputs.
- Add to cart
-
- Sale!
- MODULE & SENSOR
L298N 2A Dual Motor Driver Module
- ₹ 125
- Specification and Features of L298N 2A Dual Motor Driver Module:- Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
- Add to cart
-
- Sale!
- COMPONENTS, MODULE & SENSOR, Motor
L298N 2A Motor Driver Module
- ₹ 179
- Current Sense for each motor. Heatsink for better performance. Power-On LED indicator. Double H bridge Drive Chip: L298N. Operating Voltage(VDC): 5~35 Peak Current (A): 2 Continuous Current (A): 0-36mA No. of Channels: 2 Over-Current Protection (A): Yes Thermal Protection: Yes
- Add to cart
-
- Sale!
- LCD Display
LCD Display
- ₹ 125
- Add to cart
-
- Sale!
- MODULE & SENSOR
MAX30100 Pulse Oximeter Heart Rate Sensor Module
- ₹ 179
- Specifications & Features of MAX30100 Pulse Oximeter Heart Rate Sensor Module:- It is an integrated pulse oximetry and heart rate monitor sensor solution. Integrated LEDs, Photo Sensor, and High-Performance Analog Front -End Complete Pulse Oximeter and Heart-Rate Sensor Solution Simplifies Design Measures absorbance of pulsing blood I2C interface plus INT pin Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin Optically Enhanced System-in-Package…
- Add to cart
-
- Sale!
- MODULE & SENSOR
MAX7219 dot matrix module microcontroller module DIY KIT
- ₹ 119
- Specifications & Features of MAX7219 dot matrix module microcontroller module DIY KIT:- Requires only 3 communication wires of MCU Cascading multiple Matrix LED Module is very easy Size of the display is very compact The PCB features M3 holes for mounting.
- Add to cart
-
- Sale!
- MODULE & SENSOR
MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module
- ₹ 420
- Specifications & Features of MAX7219 LED Dot Matrix 4 In 1 Display with 5P Line Module:- Dimensions: 128 x 32 x 1.5mm(LxWxH)(All 4 in 1) Dimension 32 x 32 x 1.5 mm (LxWxH) (Single Module) A single module can drive an 8×8 dot matrix common cathode Operating voltage: 5V Weight: 55 gm Fixing screws with 64 holes with a diameter…
- Add to cart
-
- Sale!
- INSTRUMENTS & TOOLS, MODULE & SENSOR
Micro USB Cable V8 -1 Meter
- ₹ 59
- Cable length: 1 Meter Colour: White Weight: 17g Life span: 5000 Best replacement for the original one or acts as a spare The cable is made of durable and high-quality material Enable you to easily transfer all your files from or to cellphone
- Add to cart
-
- Sale!
- Microcontroller
Microcontroller (ATMEL)
- ₹ 65
- Features:- Compatible with MCS-51 Products 8K Bytes of In-System Reprogrammable Flash Memory Endurance: 1,000 Write/Erase Cycles Fully Static Operation: 0 Hz to 24 MHz Three-level Program Memory Lock 256 x 8-Bit Internal RAM 32 Programmable I/O Lines Three 16-bit Timer/Counters Eight Interrupt Sources Programmable Serial Channel Low Power Idle and Power Down Modes
- Select options
-
- Sale!
- MODULE & SENSOR
MPU6050 – Triple Axis Gyro Accelerometer Sensor
- ₹ 150
- Specification and Features :- Chip built-in 16bit AD converter 16-bit data output Driver Chip: MPU6050 Operating voltage: 3-5v dc Communication: I2C/IIC Protocol Gyro Range: ± 250, 500, 1000, 2000 °/s Accelerometer Range: ± 2 ± 4 ± 8 ± 16 g
- Add to cart
-
- Sale!
- MODULE & SENSOR
MQ-3 Alcohol Detector Gas Sensor Module
- ₹ 129
- Specifications and Features of MQ-3 Alcohol Detector Gas Sensor Module:- Signal output light indicator. Analog and level signal output. TTL output valid signal is low. (When the output low signal light can be directly connected microcontroller or relay module). The carbon monoxide detection with better sensitivity. It has a long service life and reliable stability. Rapid response recovery features.
- Add to cart
-
- Sale!
- MODULE & SENSOR
MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module
- ₹ 129
- Specification and Features of MQ-6 Liquefied Petroleum Isobutane Propane Gas Sensor module:- Good sensitivity to Combustible gas in a wide range High sensitivity to Propane, Butane, and LPG Long life and low cost Simple drive circuit An indication of the signal output Dual signal output (analog output, and TTL level output) The TTL output signal is low. (When low output…
- Add to cart
-
- Sale!
- MODULE & SENSOR
NEO-6M GPS Module with EPROM
- ₹ 309
- Specifications & Features of NEO-6M GPS Module with EPROM:- 5Hz position update rate Operating temperature range: -40 TO 85°CUART TTL socket EEPROM to save configuration settings Rechargeable battery for Backup The cold start time of 38 s and Hot start time of 1 s Supply voltage: 3.3 V Configurable from 4800 Baud to 115200 Baud rates. (default 9600) SuperSense ®…
- Add to cart
-
- INSTRUMENTS & TOOLS
Nose Plier
- ₹ 55
- Handle Type: Matted Jaw Type: Serrated Length: 160mm Material: Drop forged heat treated polished steel Plier Style: Long Nose
- Add to cart
-
- Sale!
- MODULE & SENSOR
NRF24L01 + 2.4GHZ Wireless Transceiver Module
- ₹ 79
- Specifications & Features of NRF24L01 + 2.4GHZ Wireless Transceiver Module:- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications. 125 Channels, Multi-point communication, and frequency hopping to meet the communication needs Built-in hardware CRC error detection, Multipoint communication address control. Low-power 1.9 ~ 3.6V, only 1uA on Power down mode Built-in 2.4Ghz antenna…
- Add to cart
-
- Sale!
- MODULE & SENSOR
NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module
- ₹ 249
- Specifications and Features of NRF24L01 2.4GHz PA+LNA SMA Wireless Transceiver Module:- It uses 2.4GHz global open ISM band, with license-free. Transmit power is greater than +20 dBm. Support six-channel data reception. 2Mbit/s speed makes high-quality VoIP possible Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping. Low cost: integrated with high-speed signal processing parts associated…
- Add to cart
-
- Sale!
- MODULE & SENSOR
NTC Thermistor Temperature Sensor Module
- ₹ 100
- Specifications of NTC Thermistor Temperature sensor module:- Good sensitivity. NTC thermistor sensor. The comparator output signal is more than 15mA. Possibel to adjust the temperature distribution position detection threshold Working voltage: 3.3V-5V Output form: DO digital switching outputs (0 and 1) and AO analog voltage output Fixed bolt hole for easy installation Small PCB board size: 3.2cm x 1.4cm uses…
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS
PCB CLEANING SOLUTION ACETONE (500ml)
- ₹ 179
- Specification: Flammable Liquid Content, wt.% min: 99.91 Specific Gravity: 0.792 to 0.795 Water content, wt. % max: 0.01 Appearance: Clear Color, max: 15 Hazen Odor: Alcohol-like Weight : 500ml
- Add to cart
-
- Sale!
- MODULE & SENSOR
PIR Motion Sensor Detector Module HC-SR501
- ₹ 90
- Specification and Features PIR Motion Sensor Detector Module HC-SR501 :- Wide Working Voltage Range: DC 4.5V- 20V Current Drain: <60uA Detection Angle: <140° Detection Distance: 3 to 7m (can be adjusted) Blockade time: 2.5s (Default) Work temperature: -20-+80°C
- Add to cart
-
- Sale!
- MODULE & SENSOR
Pulse Sensor – Heart Rate Detector
- ₹ 149
- Specifications & Features of Pulse Sensor - Heart Rate Detector:- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required. The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything. Visualization software (made in Processing) to instantly see…
- Add to cart
-
- Sale!
- MODULE & SENSOR
R307 Fingerprint Module
- ₹ 959
- Specifications & Features of R307 Fingerprint Module:- Supply voltage: DC 4.2 ~ 6.0V Supply current: Working current: 50mA (typical) Peak current: 80mA Fingerprint image input time: <0.3 seconds Window area: 14x18 mm Matching method: Comparison method (1: 1) Search method (1: N) Characteristic file: 256 bytes Template file: 512 bytes Storage capacity: 1000 pieces Security Level: Five (from low to…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Raspberry Pi Pico
- ₹ 325
- Specification and Features of Raspberry Pi Pico:- RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard…
- Add to cart
-
- Sale!
- MODULE & SENSOR
RC522 RFID 13.56MHZ Reader Writer Module
- ₹ 119
- Specifications & Features of RC522 RFID 13.56MHZ Reader Writer Module:- Highly integrated analog circuitry to demodulate and decode responses. Supports ISO/IEC 14443 A/MIFARE. Typical operating distance in reading/Write mode up to 50 mm. Supports ISO/IEC 14443 A higher transfer speed communication up to 848 kBd. SPI up to 10 Mbit/s. FIFO buffer handles 64 bytes send and receive. Flexible interrupt…
- Add to cart
-
- Resistor
Resistor 0.25W (1/8W)
- ₹ 1
- Featurtes :- Tolerance: 1% Max. Working Voltage: 250V Temperature Coefficient of Resistance: 50PPM/°C
- Select options
-
- Swtich
Rocker Switch
- ₹ 4
- Features :- Switch Type: SPST Contact resistance: <50mΩ Insulation resistance: >100MΩ Dielectric resistance: >1500VAC / 1 min Material type: Plastic
- Select options
-
- Sale!
- COMPONENTS, Motor
RS-775 DC Motor 12V
- ₹ 250
- Voltage: 12V DC. Torque: 3.36 N-cm. Output Power: 19.7W. Rated current (mA): 3000
- Add to cart
-
- Sale!
- MODULE & SENSOR
S32K144 Microcontroller Development Board: ElecronicsV2
- ₹ 5,000
- S32K144 MCU in LFQP100 pin package. onboard RGB LED and 2 switches 1 Variable Potentiometer On-board UART for debugging via Type C USB cable On-Board CAN transceiver IC TJA1051 via green screw Terminals. TX-RX LED indicator pins for onboard UART and CAN communication. Onboard JTAG-SWD 10-pin Connector for JLink SWD Debugging
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS, MODULE & SENSOR
Sensor Kit 24 In 1
- ₹ 2,199
- Advance Sensors & Modules Kit Product name QYT JoyStick 1 Flame Sensor 1 BMP 180 1 Heartbeat Sensor 1 NTC Thermistor Senosr 1 Temperature And Humidity Sensor DHT-11 1 IR sensor 1 Passive Buzzer module 1 Sound Sensor 1 Vibration Sensor 1 Moisture Sensor 1 Ultrasonics Sensor 1 Gas Module 1 Alchole Sensor 1 3-Axis Accelecroter meter MPU-6050 1 Water…
- Add to cart
-
- Sale!
- Motor
Servo Motor
- ₹ 120
- Specification and Features :- Model: SG90 Weight: 9 gm Operating voltage: 3.0V~ 7.2V Servo Plug: JR Stall torque @4.8V : 1.2kg-cm Stall torque @6.6V : 1.6kg-cm
- Add to cart
-
- Sale!
- MODULE & SENSOR
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port
- ₹ 259
- Specifications & Features of SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port:- Quad-band 850/900/1800/1900MHz - connect onto any global GSM network with any 2G SIM (in the USA, T-Mobile is suggested). Make and receive voice calls using a headset or an external 8Ω speaker and electret microphone. PWM/Buzzer vibration motor control AT command interface with…
- Add to cart
-
- Sale!
- MODULE & SENSOR
SIM900A Wireless GSM GPRS Module with Antenna
- ₹ 649
- Specifications & Features of SIM900A Wireless GSM GPRS Module with Antenna:- Quad-Band GSM/ 850/900/1800/1900MHz Compatible with arduino, raspberry pi, arm, avr, pic, 8051 power supply 12v 1amp to 2 amps max Use in the area of full signal strength. Perfect suited for GSM based Microcontroller Projects (better than SIM300 and other GSM Modems) Option for connecting MIC and SPEAKER directly…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer
- ₹ 55
- Specifications & Features of Soil Moisture Meter, Soil Humidity Sensor, Water Sensor, Soil Hygrometer:- Dual output mode, analog output more accurate A fixed bolt hole for easy installation With power indicator (red) and digital switching output indicator (green) Having LM393 comparator chip, stable. Operating Voltage: 3.3V~5V
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS
Soldering Iron kit for beginners
- ₹ 450
- 25WT SOLDERING IRON IRON SOLDERING STAND SOLDER WIRE WIRE CUTTER FLUX COPPER WICK TWEEZER.
- Add to cart
-
- Sale!
- MODULE & SENSOR
Sound Detection Sensor Module
- ₹ 49
- Specifications & Features of Sound Detection Sensor Module:- Operating voltage 3.3V-5V Outputs digital switching output (high and low levels 0 and 1 Operating current (Vcc=5V): 4-8mA Microphone sensitivity (1Khz): 52-48dB Microphone Impedance: 2.2KΩ Microphone Frequency: 16-20Khz Microphone S/N ratio: 54dB Signal output indication Single channel signal output Outputs low level and the signal light when there is sound
- Add to cart
-
- Sale!
- Keypad
Touch Pad
- ₹ 65
- Select options
-
- MODULE & SENSOR
TOUCH SENSOR
- ₹ 25
- Supports momentary or latching/toggle modes. Supports Active High or Active Low output signal modes. Dimensions : 15mm x 11mm. Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V. Sensitivity can adjust by the capacitance(0~50pF). Have two kinds of sampling length by pad option(SLRFTB pin). Stable…
- Add to cart
-
- Sale!
- MODULE & SENSOR
TOUCH SENSOR (Pack of 2)
- ₹ 25
- Specifications and Features:- TTP223 1-Channel Capacitive Touch Sensor Module Red Color:- Supports momentary or latching/toggle modes. Supports Active High or Active Low output signal modes. Dimensions : 15mm x 11mm. Input Voltage : 2 Volt – 5.5 Volts DC. The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V. Sensitivity can adjust by the capacitance(0~50pF).…
- Add to cart
-
- INSTRUMENTS & TOOLS
Tweezer
- ₹ 20
- Features :- Made by the high-quality stainless steel Antistatic, Anti-magnetic and anti-acid Cutting-edge parts of pure manual polishing, fine workmanship Processed in high temperature and planting antistatic material Tips after a long time of use are still super straight. Bend Tweezers Head Provides an easy and convenient operation Suitable for planting small or thin water plant Small tweezer with elbow,…
- Add to cart
-
- Sale!
- MODULE & SENSOR
ULTRASONIC SENSOR HC-SR04
- ₹ 85
- Features: Sensor Type: Ultrasonic sensor Output: Digital Sensor Voltage: 5VDC Detection distance: 2cm-400cm (0.02M - 4.0M) Static current: < 2mA Level output: high-5V High precision: up to 0.3cm
- Add to cart
-
- Sale!
- MODULE & SENSOR
ULTRASONIC SENSOR HC-SR04
- ₹ 85
- Sensor Type: Ultrasonic Output: Digital Sensor Voltage: 5VDC Detection distance: 2cm-400cm (0.02M - 4.0M) Static current: < 2mA Level output: high-5V High precision: up to 0.3cm
- Add to cart
-
- Sale!
- COMPONENTS, INSTRUMENTS & TOOLS, MODULE & SENSOR
USB 2.0 A to B Printer Cable 6 Feet (1.8 Meters)
- ₹ 59
- USB type: A-B Cable length: 1.8 M Color: white Good quality
- Add to cart
-
- COMPONENTS
USB JACK
- ₹ 10
- Features Type-A USB 2.0 Plug (Female) Universal and secure USB protocol Its plug and play (Hot pluggable) Can be used to interface mouse and keyboards to uP/uC USB power supply: 100 to 500 mA Protocol supports robust error detection
- Select options
-
- Sale!
- CAPACITOR
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
- ₹ 749
- Specification & Features of USB Logic Analyze: - Logical light indication: a small light indicates CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits. 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc. automatically. Great for MCU, ARM system and FPGA development…
- Add to cart
-
- Sale!
- MODULE & SENSOR
Vibration Sensor Module SW-420
- ₹ 55
- Specifications & Features of Vibration Sensor Module SW-420:- Using SW-420 normally closed type vibration sensor Comparator output, clean signal, good waveform, strong driving ability, >15mA Operating voltage 3.3V ~ 5V Output format: digital switching output (0 and 1) Using a wide voltage LM393 comparator With bolt holes for easy installation
- Add to cart
-
- Sale!
- MODULE & SENSOR
VOLTAGE SENSOR
- ₹ 110
- Voltage input range: DC 0-25V Voltage detection range: DC 0.02445V-25V Voltage Analog Resolution: 0.00489V DC input connector: Terminal cathode connected to VCC, GND negative pole Output interface: "+" connect 5/3.3V, "-" connect GND, "s" connect the Arduino AD pins
- Add to cart
-
- Sale!
- MODULE & SENSOR
Water Level Depth Detection Sensor
- ₹ 39
- Specifications & Features of Water Level Depth Detection Sensor:- Operating voltage: DC3-5V Operating current: less than 20mA Sensor Type: Analog Detection Area: 40mmx16mm Operating temperature: 10℃-30℃ Humidity: 10% -90% non-condensing
- Add to cart
-
- INSTRUMENTS & TOOLS
Wire Cutter
- ₹ 50
- Made of high grade alloy steel and electronically heat treated. 115mm Nipper with the capacity to cut Aluminum Wires up to 1.2mm Soft cushioned grip for comfortable work. General Use Wire Cutter
- Add to cart
-
- Sale!
- COMPONENTS
ZIF SOCKET
- ₹ 100
- Add to cart